Knowledge Check

Knowledge Check

Time limit: 0

Quiz Summary

0 of 20 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 20 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

Congratulations! You have successfully completed the Knowledge Check of our Transform Life-Saving Rules course. Please go to the course page where you can download your e-certificate.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Current
Review
Answered
Correct
Incorrect

Question 1 of 20

1. Question
1: What is the first step one should take before performing work that may require a work permit?
- A) Start the work immediately.
- B) Confirm if a permit is required.
- C) Ignore permit requirements.
- D) Reassess conditions after work has started.
Correct

Incorrect
Question 2 of 20

2. Question
2. What must be done to ensure safe mechanical lifting?
- A) Use uninspected equipment.
- B) Operate equipment without qualifications.
- C) Establish and obey barriers and exclusion zones.
- D) Carry loads by hand.
Correct

Incorrect
Question 3 of 20

3. Question
3. Before entering a confined space, what must be confirmed?
- A) The space is comfortable.
- B) The space is well-lit.
- C) Energy sources are isolated.
- D) There is a sufficient number of people inside.
Correct

Incorrect
Question 4 of 20

4. Question
4. When preparing for work in toxic gas environments, what is crucial?
- A) Ignore safety precautions.
- B) Inspect gas detector and respiratory protection equipment.
- C) Avoid testing equipment regularly.
- D) Wait for the emergency before preparing for evacuation.
Correct

Incorrect
Question 5 of 20

5. Question
5. What is an essential step in energy isolation?
- A) Guess the energy sources.
- B) Confirm that energy sources have been isolated, locked, and tagged.
- C) Use energy without testing.
- D) Check for high energy only.
Correct

Incorrect
Question 6 of 20

6. Question
6. Which rule is important to follow when driving?
- A) Wear a seatbelt at all times.
- B) Exceed speed limits when late.
- C) Use phones while driving.
- D) Drive while tired.
Correct

Incorrect
Question 7 of 20

7. Question
7. What must be obtained before bypassing safety controls?
- A) A new job.
- B) A general opinion.
- C) Authorization.
- D) A higher salary.
Correct

Incorrect
Question 8 of 20

8. Question
8. How can one keep out of the line of fire?
- A) By ignoring moving objects and pressure releases.
- B) Positioning oneself to avoid moving objects and pressure releases.
- C) Establishing exclusion zones without obeying them.
- D) Securing loose objects is unnecessary.
Correct

Incorrect
Question 9 of 20

9. Question
9. What safety measure is crucial when working at height?
- A) Inspecting fall protection equipment before use.
- B) Using faulty anchor points.
- C) Leaving tools and materials unsecured.
- D) Tying off only when convenient.
Correct

Incorrect
Question 10 of 20

10. Question
10. What is a necessary action before starting hot work?
- A) Ignoring the presence of flammable material.
- B) Starting work without authorization.
- C) Confirming flammable material has been removed or isolated.
- D) Not monitoring gas levels.
Correct

Incorrect
Question 11 of 20

11. Question
11. When should work be stopped during operations requiring a work permit?
- A) When a permit expires.
- B) When conditions change.
- C) After the job is completed.
- D) Never.
Correct

Incorrect
Question 12 of 20

12. Question
12. What should you do if you are not authorized to perform a certain work?
- A) Proceed with the work.
- B) Watch someone else do it.
- C) Seek the necessary authorization first.
- D) Guess the work procedures.
Correct

Incorrect
Question 13 of 20

13. Question
13. What should be in place before entering a confined space?
- A) A party.
- B) A rescue plan.
- C) A television for entertainment.
- D) An additional confined space.
Correct

Incorrect
Question 14 of 20

14. Question
14. What is a critical action when working in environments with toxic gas?
- A) Holding your breath.
- B) Ignoring toxic gas warnings.
- C) Preparing for emergency evacuation.
- D) Waiting for symptoms to develop.
Correct

Incorrect
Question 15 of 20

15. Question
15. What does verifying isolation and zero energy before work help prevent?
- A) Efficiency.
- B) Productivity.
- C) Unplanned outages.
- D) Accidents due to residual or stored energy.
Correct

Incorrect
Question 16 of 20

16. Question
16. If you need to bypass a safety control, what is a mandatory step?
- A) Take a guess and proceed.
- B) Obtain authorization.
- C) Ignore the safety control.
- D) Inform your colleagues and bypass.
Correct

Incorrect
Question 17 of 20

17. Question
17. How should you behave when establishing barriers and exclusion zones?
- A) Disobey them as you see fit.
- B) Establish them but do not obey.
- C) Establish and obey them strictly.
- D) Only establish them for others to obey.
Correct

Incorrect
Question 18 of 20

18. Question
18. What must you do with your fall protection equipment each time before use when working at height?
- A) Store it properly after use.
- B) Inspect it.
- C) Disregard its condition.
- D) Use it without inspection if it was fine the last time.
Correct

Incorrect
Question 19 of 20

19. Question
19. When is it necessary to tie off to an approved anchor point?
- A) Only when supervisors are watching.
- B) When working at ground level.
- C) 100% of the time while outside a protected area at height.
- D) When you personally feel it's needed.
Correct

Incorrect
Question 20 of 20

20. Question
20. In preparation for hot work, when should a gas test be completed in a hazardous area?
- A) After starting the work.
- B) Only if there is a smell of gas.
- C) Before starting any hot work.
- D) Gas testing is not necessary.
Correct

Incorrect